Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING ISSUE
Swirls on the floor after scrubbing.
Swirls on the floor after dry buffing.
Circles on the floor.
Floor finish removed.
Machine wobbles during operation.
Machine does not turn on.
PAGE 4 OF 12
TROUBLESHOOTING
1.
Area not properly swept – debris in pad or brush.
2.
Incorrect solution.
3.
Improper pad or brush for the job.
4.
Moving the machine too fast.
1.
Moving the machine too fast.
2.
Floor finish too soft.
3.
Area not properly swept – debris in pad or brush.
4.
Improper pad or brush for the job.
1.
Machine standing still while the brush or pad is running.
1.
Improper pad – too aggressive.
2.
Solution too strong.
1.
Defective pad – one side is more dense than the other.
2.
Machine left sitting on brush or pad for extended period of time
causing bristles or pad to "take a set."
3.
Pad not "seated" properly into pad holder bristles.
4.
Warped block on brush or padholder; replace.
1.
Check plug for proper connection on machine and at wall
outlet.
2.
Check building circuit breaker.
3.
Call Uline Customer Service at 1-800-295-5510 for repair or
service. Please have serial number ready.
1-800-295-5510
uline.com
CAUSES
0521 IH-3579
Publicidad
Tabla de contenido
