ASROCK Fatal1ty Z87 Killer Serie Manual De Instrucciones página 18

Ocultar thumbs Ver también para Fatal1ty Z87 Killer Serie:
Tabla de contenido

Publicidad

Chapter 2 Installation
his is an ATX form factor motherboard. Before you install the motherboard, study
the coniguration of your chassis to ensure that the motherboard its into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard's components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
• When placing screws to secure the motherboard to the chassis, please do not over-
tighten the screws! Doing so may damage the motherboard.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Fatal1ty z87 killer

Tabla de contenido