Operation - Inflating Other Items - HDX HD-005 Guía De Uso Y Cuidado

Operation – Inflating Other Items
1
Preparing the inflator Preparing the
Preparing the Preparing the
Remove the cord storage area cover (L) to reveal the air
□
hose (C) and power cord (B).
Select a suitable adapter (F) for the item that you intend to
□
inflate, ensuring it will fit properly into the item's inlet
valve.
Reference the item owner's manual for the recommended
□
air pressure.
Ensure that the compressor switch (G) is set to the OFF
□
position, and plug the power cord (B) into an appropriate
power source (DC 12V or a cigarette lighter socket).
L
G
B
inflator
inflator inflator
F
A
2
Operating the inflator Operating the inflator
Operating the inflator Operating the inflator
WARNING: Avoid over-inflating. Never exceed the
recommended pressure, as items over-inflated may burst
and cause serious injury.
Place the chosen adapter (F) into the lock valve stem
□
connector (D), and close the thumb latch.
Insert the adapter (F) into the item's air inlet valve, ensuring
□
a secure fit.
Set the compressor switch (G) to the ON position, and
□
monitor the pressure gauge (J).
When the required pressure is reached, set the compressor
□
switch (G) to the OFF position, and remove the adapter (F)
from the inflated item.
Remove the power cord (B) from the power source, and the
□
adapter (F) from the lock valve stem connector (D).
Place the air hose (C) and power cord (D) back into the
□
storage area, and secure them with the cord storage area
cover (L).
IMPORTANT: Always check items being inflated with a
proper pressure gauge.
D
F
5
Please contact 1-800-514-6729 for further assistance.
J
G
L
B
HOMEDEPOT.COM
A