Parts & Assembly - Nostalgia Electrics ICM700 Instrucciones Y Recetas

PARTS & ASSEMBLY
Take the ELECTRIC ICE CREAM MAKER out of the box and wash the
Freezer Bowl, Cover and Dasher with a non-abrasive cloth in warm, soapy
water and dry thoroughly. DO NOT wash the Motor Housing.
Carefully wipe down the Motor Housing with a non-abrasive cloth or
sponge. NEVER immerse the Motor Housing in water. Dry thoroughly.
Now you are ready to make creamy, delicious ice cream
from your ELECTRIC ICE CREAM MAKER.
PARTS
Cover
TOP
ASSEMBLY
1. Push the Cover onto the Motor Housing until circular holes are aligned.
2. Insert the Dasher into the Motor Housing and align the grooves in Dasher with Cover.
3. Slide the motor housing forward until it snaps into place.
4. Place the Motor Housing with Cover and Dasher attached on top of the Freezer Bowl.
5. Rotate clockwise and slide in the locking teeth until cover snaps into place.
5
Motor Housing
Dasher
ON/OFF
Switch
Ingredient
Window
Freezer Bowl