Hydrofarm Sunburst SBD2540 Manual De Instrucciones página 3

• Avoid direct contact with water and liquids to prevent electric shock or internal damage to the
unit
• The lamp may require 10-30 minutes cooling time before restarting
• After you plug in the Sunburst, the lamp may require several minutes to reach its full brightness
• In the event of a momentary power interruption, be aware that the bulb will not restart
immediately
• Some variation in the color of light emitted by the bulb is not unusual, especially in the first 100
hours of operation
• Never pull the cord to unplug the reflector—pull the plug only
• Avoid scratching the bulb, subjecting it to undue pressure, or getting it wet when it is hot—these
actions may cause the bulb to break
• In the event of bulb breakage, immediately unplug the reflector to prevent exposure to
ultraviolet energy, which may be harmful to eyes and skin.
• Keep room temperature below 95°F, with adequate air circulation by fan in the growing area
• To enhance the safety of the Sunburst unit, order the optional tempered glass safety lens (item
code SBLENSYS)
SPECIFICATIONS
• Size: 17½"L x 8⅝"W x 4⅜"H
• Weight: 7.85 lbs
• Highly reflective hammertone aluminum specular interior
• Pre-galvanized powder coated body
INSTRUCTIONS
3