HMM Diagnostics SmartLab fit W Manual De Usuario página 65

Setting time
You can set the time (hours & minutes) by turning and pushing
the scroll wheel, just as explained before. After that, you will
enter the signal tone mode.
Setting signal tone
If the signal tone is activated, your meter will beep after every
measured glucose value. To switch the tone on or off, enter the
menu. In the upper display row you can see „bE-bE" and the set-
ting alternatives:
OFF = signal tone is switched off
ON = signal tone is switched off
Choose the desired setting by turning the scroll wheel and con-
firm by pressing the wheel. You will enter the LCD measuring unit
setting mode after that.
65