Storing, Displaying And Deleting Test Results - HMM Diagnostics SmartLab fit W Manual De Usuario

Storing, displaying and deleting test results

Your meter automatically saves up to 360 glucose test results
with date and time. You can display these results at any time. The
values are saved chronologically, beginning with the latest value.
Thus, it is important that date and time are set correctly in your
smartLAB
genie meter.
®
Note:
1.Never change your diabetes therapy due to one single saved
result.
2.Stored memory won't get lost when you replace the batteries.
However, please check if date and time are still set correctly.
3.If the memory is full and a new result is saved, the oldest result
on the memory (no. 360) will be deleted.
Displaying test results:
• Press the S-button to power on the meter and wait until it is
in start up mode.
• You can display the stored results by either turning the scroll
wheel up or down. It starts with the latest value. By turning
the wheel, you can scroll through the results on the memory.
77