ASROCK K8Upgrade-NF3 Manual De Instrucciones página 15

Before you start to configure the RAID function, you need to
check the installation guide in the Support CD for proper configuration.
Please refer to the document in the Support CD, "Guide to SATA Hard
Disks Installation and RAID Configuration", which is located in the folder
at the following path:
.. \ RAID BIOS Setting Utility
After step1, 2, 3, you can start to install Windows 2000 / Windows XP / Windows XP
64-bit.
NOTE. If you install Windows 2000 / Windows XP / Windows XP 64-bit on IDE HDDs and
want to manage (create, convert, delete, or rebuild) RAID functions, you still need
to set up "SATA Operation Mode" to [RAID] first. Then, please set the RAID
configuration by using "RAID Utility for Windows" in Windows environment.
Please refer to the document in the Support CD, "Guide to nVidia RAID Utility
for Windows", which is located in the folder at the following path:
.. \ RAID Utility for Windows
2.9 2.9 2.9 Installing Windows 2000 / Windows XP / Installing Windows 2000 / Windows XP / Installing Windows 2000 / Windows XP /
2.9 2.9 Installing Windows 2000 / Windows XP / Installing Windows 2000 / Windows XP /
Windows XP 64-bit Without RAID Functions Windows XP 64-bit Without RAID Functions Windows XP 64-bit Without RAID Functions Windows XP 64-bit Without RAID Functions Windows XP 64-bit Without RAID Functions
If you just want to install Windows 2000, Windows XP or Windows XP 64-bit on your
SATA HDDs without RAID functions, you don't have to make a SATA driver diskette.
Besides, there is no need for you to change the BIOS setting. You can start to install
Windows 2000, Windows XP or Windows XP 64-bit on your system directly.
2.10 2.10 2.10 Installing W 2.10 2.10 Installing W Installing W Installing Windows 98 SE / W Installing W indows 98 SE / W indows 98 SE / Windows ME on SA indows 98 SE / W indows 98 SE / W
If you want to install Windows 98 SE / Windows ME on SATA HDD, it must be installed
on SATA 1 in order to finish the OS installation process. After finishing the installation
of Windows 98 SE / Windows ME, please install Windows SE 98 / Windows ME
registry patch file provided in the support CD, which is located in the folder at the
following patch:
.. \ Nvidia SATA patch for Win98/ME
Then the SATA HDD can be used in SATA 1 or SATA 2 port.
Windows 98 SE / Windows ME does not support RAID function.
ASRock K8Upgrade-NF3 Motherboard
indows ME on SAT T T T T A HDD indows ME on SA indows ME on SA indows ME on SA A HDD A HDD A HDD A HDD
1 5 1 5 1 5
1 5 1 5