Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
English
Product schematic
C
A
No.
Name
A
USB3.0
B
Power Switch with LED indicator
C
DC-IN Jack
SATA Interface
D

How to USE

1. Insert HDD into slot of FE3002 correctly.
2. Connect FE3002 with computer by USB cable
3. Connect DC power adapter with FE3002
4. Switch on the enclosure and corresponding drive will appear in file manager.
Note
a. Make sure data access and transfer are stopped when remove the hard drive enclosure
from computer, otherwise data loss might happen.
b. Hard drive will automatically start sleep mode if idle state lasts 30 minutes, when LED
comes into breathing light state. Data access to the drive will restore operational mode.
D
B
1

Publicidad

Tabla de contenido
loading

Tabla de contenido