GE 168960 Manual Del Usuario página 4

840112500 ENv03 2/24/03 8:35 AM Page 4
How to Assemble the Mixer
IMPORTANT: To remove or insert the Bowl or Attachments, the Mixer Head must be
raised and locked in the UP position.
To Attach the Bowl
Lock
To Attach the Beater, Wire Whisk, or Dough Hook
• Unplug mixer before inserting or removing beaters.
• Unplug mixer before cleaning. Failure to do so can result in broken bones or cuts.
4
1. Make sure that the Setting Control
is set to OFF and the Mixer is
unplugged.
2. Press the Mixer Release Button and
tilt the Mixer Head up.
3. Place Bowl on bowl lock and turn
clockwise until Bowl is locked.
4. Plug Mixer into electrical outlet.
Unlock
To Remove:
1. Make sure that the Setting Control
is set to OFF and the Mixer is
unplugged.
2. Press the Mixer Release Button and
tilt the Mixer Head up.
3. Turn Bowl counterclockwise to
unlock.
wWARNING
Injury Hazard
1. Make sure that the Setting Control
is set to OFF and the Mixer is
unplugged.
2. Press the Mixer Release Button and
tilt the Mixer Head up.
3. Insert Attachment onto Beater Shaft
and press upward as far as possible.
4. Turn the Attachment to the right,
hooking beater over pin on shaft.
5. Plug Mixer into electrical outlet.