Marklin Digital mSD Manual De Instrucciones página 6

Note:
The CVs and values shown correspond to the basic decoder with the latest firmware level. In individual cases or
with older firmware levels, individual CVs may be assigned differently.
CV (DCC) Assignment
1 Address
2 Minimum speed
3 Acceleration delay
4 Braking delay
5 Maximum speed
8 Reset
13 Functions F1 – F8 in the case of alternative track signal
Functions FL, F9 – F15 in the case of alternative track
14
signal
17 Long address, higher value byte
18 Long address, lower value byte
19 Multiple unit operation address
21 Functions F1 – F8 in the case of multiple unit operation
22 Functions FL, F9 – F15 in the case of multiple unit operation 0 – 255
Bit 4 = Normal braking behavior
27
Bit 5 = Inverse braking behavior
Bit 0 = Direction normal/inverted
Bit 1 = Number of speed levels 14/28(128)
29
Bit 2 = Analog operation off
Bit 5 = Short / long address
Bit 1: Analog DC off/on
50
Bit 3: mfx off/on
53 Motor control – control reference
54 Motor control – control parameter K
55 Motor control - control parameter I
56 Motor control – control influence
59 Sound when Changing Direction
Multiple station announcements
Bit 0 – 3 = Number of stations
60 Bit 4 = Last station reverses the sequence.
Bit 5 = Locomotive direction determines the sequence.
Bit 6 = Basic setting for sequence.
63 Volume
64 Brake threshold
138 Volume for sound of squealing brakes
139 Volume for sound of operating sounds
140 Volume for Sound 1
141 Volume for Sound 2
142 – 154 ...
155 Volume for Sound 16
176 Minimum speed in analog DC
177 Maximum speed in analog DC
257 – 260 Function assignment FL forwards
262 – 265 Function assignment F1 forwards
1 Increase if the reaction is too slow; reduce in the case of stuttering
2 Increase if the oscillation is slow; reduce in the case of hard acceleration or overreaction
Range Comment
1 – 127 Short address
0 – 255
0 – 255
0 – 255
0 – 255
8
0 – 255 Functions for analog operation
0 – 255 Functions for analog operation
192 – 231 Long address must be activated
0 – 255
0 – 255
0 – 255
0, 16, 32
0 – 63
0 – 15
0 – 255
0 – 255 (64)
0 – 255 (64)
0 – 255
0 – 255 0 = no sound
1 – 127
255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
0 – 255
6
in CV 29 Bit 5.
0 / 16
0 / 32
0 / 1
0 / 2
0 / 4
0 / 32
0 / 1
0 / 4
(150) Vmax for motor characte-
ristic
1
2
(24) determines the interval at
which the motor is adjusted
Is entered and displayed inver-
sely on the CS2