Christie LX41 Manual De Usuario página 35

5.4 Setting the menu - Inputting image to Sub and Main individually
3.
Use the ▲/▼
button to display the SUB INPUT SOURCE
4.
Use the ▲/▼ buttons to highlight FOLLOW MAIN
UNIT, and press the ►
ting. ( 23 )
5.
the COMPUTER or VIDEO button on the
Press
remote control or the INPUT button on the con-
trol panel of the Main projector, the MAIN INPUT
SOURCE dialog is displayed on screen. Use the
▲/▼ buttons to highlight the port to which the
signal cable is connected, and press the ► button
to complete the setting.
• If FOLLOW MAIN UNIT is selected, selecting the input source on
NOTE
either the Main or Sub projector will automatically set the other projector to the
same source.
• If FOLLOW MAIN UNIT is selected, LAN, USB TYPE A and USB TYPE B
cannot be selected.
• When FOLLOW MAIN UNIT is selected, if any button for setting the input
ports including COMPUTER, VIDEO, MY SOURCE/DOC.CAMERA and
MY BUTTON (assigned with input source related functions) buttons on the
remote control and the INPUT button on the projector is pressed, the dialog for
selecting the input source will be
LX41/LW41 User Manual - Instant Stack Guide
buttons to highlight SUB INPUT SOURCE, and press the ►
button to complete the set-
displayed.
Setting input ports using menu
(continued)
dialog.
33
020-000509-01 Rev.1 (06-2012)