Improper Use; Work Area - Eurosystems MSP 02 Manual De Uso

and protection systems are intact and
correctly fitted.
4. Walk, do not run, while working.
5. Do not start the machine in closed
rooms where carbon fumes can accu-
mulate.
6. Work only during daylight hours with good
lighting and visibility (minimum visibility re-
quired equal to the work area defined in the
"WORK AREA" paragraph).
7. Do not work during thunderstorms
and/or on wet or slippery ground.
8. Do not work on slopes of more than
10° unless using specific equipment
for work on slopes (not available on all
machines or versions). Use the utmost
caution when reversing the direction of
travel and when pulling the machine to-
wards you.
9. Always make sure that there are sup-
port points on slopes. Keep feet at a suit-
able distance from the tools and do not
put hands or feet near moving parts.
10. Always drive the machine with both
hands on the handlebar.
Instructions for adjustment and mainte-
nance:
DANGER!
All ADJUSTMENT and MAINTENANCE
operations must be carried out with the
motor switched off. Remove the spark
plug cap or ignition key (if present) to
avoid unexpected start-up.
Keep all nuts, bolts and screws tightened
to ensure safe machine operation.
Only use original Eurosystems spare
parts. The owner loses all warranty rights
when using non-original spare parts.
Do not make any structural changes or
adaptations. Such changes will invalidate
the warranty and the manufacturer's lia-
bility.
We reserve the right to make design im-
provements to the machine and/or the in-
terchangeable equipment without making
changes to these instructions.
Instructions for lifting:
DANGER!
Use lifting systems that are undamaged
and suitable for the masses to be lifted
(see the HANDLING AND TRANSPORT
paragraph).
DANGER!
Do not stand under suspended loads.
2.1 DESCRIPTION AND FIELD OF USE
The MSP 02 machine is an internal-com-
bustion-engine-driven brush designed for
cleaning and maintaining the synthetic
grass. The tool is particularly suitable for
reviving the turf during the installation and
subsequent maintenance phases, giving
it a lively and natural look. In addition to
making the lawn softer and more beautiful,
the MSP 02 brush, adjustable in height, al-
lows you to clean the grass surface while
collecting various types of residues such
as leaves, vegetal residues, animal hair,
etc.

2.2 IMPROPER USE

DANGER!
All the dangers described in this par-
agraph can generate serious injury or
death of the operator.
1. Only use the machine for the intended
use described above.
2. Do not use the machine to transport ob-
jects, people or animals.
3. Do not use the machine to tow and/or
push carts or other devices.
4. Do not mount any other equipment not
authorised by the manufacturer.
5. Do not modify machine parts.
6. Do not exclude or tamper with protec-
tion systems.
7. Do not overturn the machine with the
engine running.
8. If you need to lift the machine (for ex-
ample, to overcome a step), tilt the front
wheels no more than 5 cm, while the rear
wheels must never be raised to avoid be-
ing hit by objects projected by the moving
tool.
9. Disengage the movement of the tool
when you push the machine on non-grass
surfaces to prevent stone fragments or
other objects from entering the machine
and being thrown.

2.3 WORK AREA

DANGER!
All the dangers described in this par-
agraph can generate serious injury or
death of the operator.
The user is responsible for the safety of
persons, property and animals within the
machine danger zone.
This zone is defined as the internal area
of a circumference of a minimum radius of
10m with the tool mounted on the machine
in the centre.
Do not stand in the danger zone for any
reason while the machine is in operation.
Only the operator, who has read and un-
derstood the manual in all its parts, is au-
thorised to stand within this area and to
occupy the only operating position, locat-
ed behind the handlebar, holding it firmly.
The operator must check the surrounding area
before starting the machine and must pay par-
ticular attention to children and animals.
Before starting work on a certain area,
clean it of foreign objects.
Always pay attention to the ground and
the surrounding area when working. If un-
desired and/or dangerous objects are de-
tected, switch off the machine and secure
it before leaving the operating position to
remove them, being sure to prevent the ma-
chine from starting, moving or tipping over.
2.4 CLOTHING
INFORMATION!
The procurement of such personal pro-
tective equipment is the sole responsibil-
ity of the customer or employer.
During machine use and maintenance
operations:
The operator MUST always wear suitable
safety shoes, gloves, and hearing protec-
tion devices and wear long, resistant trou-
sers and safety goggles.
Do not wear loose-fitting clothing, jewelry,
ties, scarves, dangling drawstrings that
could get caught (by the equipment). Tie
up your hair.
During unpacking and assembly:
The operator MUST always wear resistant
safety shoes, gloves, and clothing.