Safety Instructions - DeLOCK 11826 Manual Del Usuario

English
System requirements
• WLAN Gateway
Package content
• WLAN power socket switch
• User manual

Safety instructions

• This product is only intended for the connection of 220 V ~ 250 V devices to the power line.
• The total power of the connected electrical equipment must not exceed the rated power 2500 W of this product.
• To reduce the risk of electric shock-use only indoors and in dry locations.
• Keep it away from liquids and extreme heat.
• The power switch should only be plugged into a grounded outlet.
• Disconnected from Voltage only when the plug is pulled out.
• Do not attempt to disassemble or open the unit.
Installation
1. Connect the WLAN switch to a wall socket. The LED will start lighting.
2. Start a WLAN capable device, like a smartphone, tablet or computer.
3. Search for the WLAN named "delock-XXXX" (XXXX: 4 numbers) and connect to it. A notification window opens to sign into the
network. Alternatively, open a browser with the IP 192.168.4.1 Enter the name and password of your existing WLAN home network.
Note the four numbers (delock-XXXX ) for later use.
4. The WLAN switch will restart and connect to your home network.
Operation
There are several ways to operate the device:
1. Pushing the button on the device
2. Using the web interface
3. Connecting the switch to a smart home system like Alexa
4. Connecting the switch to a smart home system with MQTT
The red LED signals the power status of the switch.
Web Interface
To use the web interface, you have to find the IP address of the switch. Depending on your home network, there are several options you
can choose from.
1. If you know how to configure your WLAN router:
Open the user interface of your home router to find the IP address of the WLAN switch. Most routers show a list of devices connected
to the network.
2. If you are running Mac OS or Windows 10 on a computer:
Open a web browser with the address: http://delock-XXXX.local/ or http://delock-XXXX/ (XXXX: 4 numbers).
3. If you have an AVM Fritz box:
Open a web browser with the address: http://delock-XXXX.fritz.box (XXXX: 4 numbers).
4. If you want to find the IP address with a Android device or iPhone:
Install the APP "Fing" on your mobile device. It examines your network and displays the IP address of the WLAN switch.
With the IP address you can start the web interface of the device in your browser, there are several options:
1. You can toggle the switch on or off.
2. You can enter advanced configuration to connect to a smart home gateway or program a timer (see section advanced configuration).
3. See general information about the switch and the firmware.
4. Upgrade the firmware (see section firmware update).
5. Open a console to enter commands. For a list of commands please refer to the Tasmota Wiki: https://github.com/arendst/Sonoff-
Tasmota/wiki/Commands
6. Restart the WLAN switch.
Configuration with Alexa
The device is using an emulation for use with Alexa. To make it usable in Alexa, just search for new devices, and a WLAN switch will be
recognized.
Firmware Update / Changing the language
The default language of the WLAN switch is German. If you want to change the firmware of the web interface, go to "Firmware Update".
Edit the filename of the OTA URL reflecting your language: "11826en.bin" for English or "11826de.bin" for German. Start the upgrade, and
wait for the device to restart.
-2-