Safety Instructions - DeLOCK 11497 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 5
English
Description
The extension socket cube by Delock with USB charging function is suitable for convenient connection of various devices. A wall bracket
is integrated, so that the socket can also be mounted on the wall or under the desk.
Make 3 out of 1
Whether in the kitchen, living area or office. There is a lack of free sockets. This multiple socket makes three out of one free grounded
socket. The cube shape also provides a space-saving solution.
USB charger included
The charger has been integrated so that the additional slots don't have to be occupied by chargers. In addition to the sockets, one USB
Type-C™ and two USB Type-A charging ports are provided.
Specification
• Connectors:
Input: 1 x plug CEE 7/7
Output: 3 x socket CEE 7/3
2 x USB Type-A female
1 x USB Type-C™ female
• Rated current: 16.0 A / 250 V~
• Rated power: 3680.0 W
• Wallmount option
• LEDs for status monitoring
• USB Charger:
Input: AC 250 V / 50 Hz / 0.5 A
Output: max. 3.4 A total (max. 17.0 W)
USB-A: 5.0 V / 2.4 A per port
USB-C™: 5.0 V / 3.0 A
Over current protection, over heating protection, short circuit protection
• Average active efficiency 87.64 %
• Efficiency at low load (10 %) 82.52 %
• No-load power consumption 0.088 W
• Colour: white
• Cable length: ca. 1.5 m
• Dimensions (LxWxH): ca. 66 x 66 x 66 mm
Package content
• Socket cube
• 2 screws
• User manual

Safety instructions

• This product is only intended for the connection of 220 V ~ 250 V devices to the power line.
• The total power of the connected electrical equipment must not exceed the rated power 3680 W of this product.
• To reduce the risk of electric shock-use only indoors and in dry locations.
• Keep it away from liquids and extreme heat.
• The socket cube must only be plugged into a grounded outlet.
• Do not connect several power strips in a row.
• Do not cover when in use.
• Disconnected from Voltage only when the plug is pulled out.
• Unplug the product during the thunderstorms.
• It is recommended to replace the socket cube after a serious power surge or several years of using.
Installation and Operation
1. Insert the plug of the socket cube into a wall socket.
2. Connect your electric appliance and electronic devices to the AC outlets and USB ports.
3. Unplug your USB devices from the socket cube when fully charged or not in use.
Support Delock
If you have further questions, please contact our customer support support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose, regardless in which way or by any means, electronically or
mechanically, without explicit written approval of Delock.
Edition: 11/2021
-2-

Publicidad

Tabla de contenido
loading

Tabla de contenido