miniland baby minidrop Manual Del Usuario página 11

5. INSTRUCTIONS FOR USE
1. Remove the water tank (3) from the unit base (6) open the cap (4), fill the
water tank with water, close the cap, and put the water tank on the base
correctly.
2. Put the nozzle (1) in the notch of the water tank and turn the nozzle facing
away from the walls and furniture.
3. Plug the humidifier in, turn on the power switch (8) - never switch it on
without water. The power indicator will light up and the humidifier will begin
to work. Turn the mist setting knob (13) to select the desired mist flow.
Note: It is normal if a little mist overflows from the nozzle when it starts
working.
NOTE:
• In cold weather, windows, and even some walls may fog or develop frost
from excessive indoor humidity. If this occurs, reduce the mist intensity
setting to avoid damage from condensed water dripping on windowsills.
• Too much humidity in the room may allow moisture to accumulate on
surfaces where bacteria and fungi can grow. Collected moisture may also
harm furniture, and walls, especially wallpaper.
• To eliminate too much humidity, especially in a small room, leave the room
door open, and adjust the mist intensity control setting.