Getting Started; Charging The Battery - Kokido TELSA 30 Manual De Usuario

Limpiafondos recargable inalámbrico
Ocultar thumbs Ver también para TELSA 30:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

-
DO NOT leave the pool vacuum charged for over 20 hours.
-
If the pool vacuum will not be used for an extended period, detach it from
the charging base and use a damp cloth to clean and dry the pool
vacuum and accessories. Make sure to charge the pool vacuum
completely before it is stored. Store in a well-ventilated area away from
sunlight, heat, ignition sources, pool chemicals, and children. Never
leave the pool vacuum plugged in for long-term storage. Recharge the
pool vacuum every three months.
Above warnings and cautions are not intended to incorporate all possible
instances for risks and / or severe injuries. Pool / spa owners should always
exercise extra caution and common sense when utilizing the product.

GETTING STARTED

IMPORTANT NOTE: Fully charge the pool vacuum before using it for the first time.

Charging the battery

WARNING!
 Charging must be done indoors, in a well-ventilated area away from sunlight,
children, heat, ignition sources, and with an ambient temperature between 5˚C (41˚F)
and 35˚C (95˚F).
 Never use the external adaptor and charging base if any damage is detected.
 Use only the original external adaptor provided.
 Make sure the pool vacuum and the charging base are clean and dry before set-up.
1. Place the unit on a flat surface. Align and slide the hook of the charging base onto
the side notch at the bottom of the main body until it stops. Make sure their contact
plates are properly in contact.
2. Plug the female jack of the external adaptor into the charging port at the end of the
charging base.
9

Hide quick links:

Publicidad

Tabla de contenido
loading

Productos relacionados para Kokido TELSA 30

Este manual también es adecuado para:

Vektro z200

Tabla de contenido