Tripp-Lite B024-DPU08 Guia De Inicio Rapido página 7

Operation
Hotkey Setting Mode (HSM)
Hotkey Setting Mode is used to set functions on the switch. Follow the steps below to invoke HSM and perform a hotkey
function.
1. Press and hold down the [Num Lock] key.
2. Press and release the [-] key.
3. Release the [Num Lock] key.
4. Press the hotkey to perform the desired function. Refer to the table below for the function.
HSM Summary Table
Key Function
[Port ID][Enter] Switches the KVM, audio and USB focus directly to the computer that corresponds to that Port
ID (B024-DPU08: 1-8 / B024-DPU16: 1-16).
[Port ID][K][Enter] Switches the KVM and audio focus directly to the computer that corresponds to that Port ID
(B024-DPU08: 1-8 / B024-DPU16: 1-16).
[Port ID][U][Enter] Switches only the USB focus directly to the computer that corresponds to that Port ID
(B024-DPU08: 1-8 / B024-DPU16: 1-16).
Note: This hotkey function works on single-stage installation only.
[A][Enter] Starts Auto Scan. The KVM focus cycles from port to port at the default 5-second interval.
[F1] Sets the port OS to Windows.
[F2] Sets the port OS to Mac.
[F3] Sets the port OS to Sun.
[M] Enables / disables mouse emulation.
7