Onkyo SBT-200 Manual De Instrucciones página 18

Pairing with Bluetooth enabled devices
1
Press the button to turn the power on.
2
Press the INPUT button to select Bluetooth function.
3
Press the PAIRING button.
• The PAIRING indicator flashes. The sound bar is now in pairing mode and is ready to be paired
with other Bluetooth source device.
• Pairing can be made regardless of the current input source.
4
Perform pairing procedure on the source device to detect the sound bar.
• Refer to the instruction manual of the source device for details.
• "Onkyo SBT-200" will appear in the detected devices list (if available) in the source device.
• Place the devices to be paired within 1 meter of each other when pairing.
• Some source devices are unable to display lists of detected devices. To pair this sound bar with
the source device, refer to the instruction manual of the source device for details.
5
Select "Onkyo SBT-200" from the source list. If passcode* is required, enter "0000".
• Pairing indicator (blue) on the sound bar will stop flashing once the sound bar is successfully
paired with the source device. Pairing information is now memorized in the sound bar.
* Passcode may be called PIN Code, Passkey, PIN number or Password.
6
Start the Bluetooth connection from the source device.
• Some audio source devices may connect with the sound bar automatically, otherwise follow the
instructions in the instruction manual of the source device to start connection.
Note
• If the sound bar or the source device is turned off before Bluetooth connection is completed, pairing
will not be completed and the pairing information will not be memorized. Repeat step 1 to start
pairing again.
• To pair with other devices, repeat steps 1 - 5 for each device.
• Once a device is ousted or deleted from the pairing list, the pairing information for the device is also
deleted. To listen to the sound from the device again, it needs to be re-paired. Perform steps 1 - 5 to
pair the device again.
• Passcode of this sound bar is fixed to "0000" and can only be paired with Bluetooth source device
whose passcode is also "0000".
Pairing with Bluetooth enabled devices using NFC
• On an NFC enabled device, Bluetooth pairing can be made only by holding the device over the sound
bar.
• Check that the NFC function on the device is "ON".
1
Turn on the sound bar and the device.
2
Start an app for reading NFC on the device.
En-18