Connecting Genibus To The Pump - Grundfos GiM CIU Instrucciones De Instalación Y Funcionamiento

1
Electrical connection
Pos. Description
1 Protective earth terminal
2 Neutral terminal
3 Phase terminal
40mm (1.58")
30mm (1.18")
Wire requirements
Related information
6. Electrical connection
6.3 Connecting GENIbus to the pump
6.5 Connecting the IO connections
10
2 3
N L
5mm
(0.20")
N
L
5mm
(0.20")

6.3 Connecting GENIbus to the pump

1. Remove the front cover.
2. Lead the GENIbus cable through the cable gland.
3. Connect the conductors to terminals A, Y and B.
4. Connect the cable screen under the earth clamp,
and tighten the earth clamp.
5. Tighten the cable gland.
6. Fit the front cover.
Example:
1 2
A Y
GENIbus connection
Pos. Designation Description
GENIbus terminal A. Positive
1 A
data signal.
2 Y GENIbus terminal Y
GENIbus terminal B.
3 B
Negative data signal.
4 - Earth clamp
Related information
6. Electrical connection
6.2 Connecting the power supply
3
B
4