SuperTrak EX4350 Quick Start Guide
Step 5: Install Software Drivers
Drivers for the Windows operating systems are included on the CD that came
with your SuperTrak Controller card. Please download the latest drivers from the
Promise website at www.promise.com/support.
Windows systems usually recognize the SuperTrak Controller, prompt you for the
CD or diskette and perform the driver installation automatically.
If you are installing the SuperTrak Controller at the same time as your operating
system or you prefer to read step-by-step directions, see Chapter 3 of the
SuperTrak EX4350 User Manual on the software CD.
Step 6: WebPAM Installation
A complete set of installation instructions is found in Chapter 2 of the SuperTrak
EX4350 User Manual on the software CD.
Operating System Support
On the Host PC where you install the SuperTrak controller and WebPAM,
Promise Technology recommends:
•
Windows 2000
•
Windows XP Professional
•
Windows 2003
•
Red Hat Enterprise 4.0
WebPAM supports these operating systems. Choose one of them to take full
advantage of all the features of WebPAM.
Browser Support
On the Host PC where you install the SuperTrak controller and WebPAM, you
must have one of the following browsers:
•
Internet Explorer
•
Mozilla
•
Firefox
•
Netscape Navigator
If you do not have one of the above browsers, install the browser first and make it
the default browser. Then install WebPAM.
•
SuSE ES 9.1, 9.2, 9.3, 10.0
•
Miracle Linux 3.0
•
Fedora Core 5.0
•
FreeBSD 5.4, 5.5, 6.0, 6.1
10