• Do not locate multiple portable
socket-outlets or portable
power supplies at the rear of the
device.
• Keep the ventilation openings
on the device housing or in
installations free of obstruc-
tions.
• Do not use any mechanical
objects or other means to speed
up the defrosting process,
unless they have been recom-
mended by the manufacturer for
this purpose.
• Do not damage the refrigerant
circuit.
!
CAUTION! Failure to obey
these cautions could
result in minor or
moderate injury.
Health hazard
• Please check if the cooling
capacity of the device is suita-
ble for storing the food or medi-
cine you wish to cool.
• Food may only be stored in its
original packaging or in suitable
containers.
• Opening the lid for long periods
can cause significant increase
of the temperature in the com-
partments of the device.
• Clean regularly surfaces that
can come in contact with food
and accessible drainage sys-
tems.
10
• If the device is left empty for
long periods:
–Switch off the device.
–Defrost the device.
–Clean and dry the device.
–Leave the lid open to prevent
mould developing within the
device.
A
NOTICE! Damage hazard
• Only carry the cooling device
upright.
• Check that the voltage specifi-
cation on the type plate
corresponds to that of the
energy supply.
• Do not use electrical devices
inside the cooling device unless
they are recommended by the
manufacturer for the purpose.
• Hazard from excessively low
temperature
Ensure that only those objects
are placed in the cooling device
that are intended to be cooled
at the selected temperature.
• The cooling device shall not be
exposed to rain.