After-Sales Service; Dismantling And Disposal - Bonnet Neve PROXIMA-VISEO LIFT Instrucciones De Uso Para El Usuario

Ocultar thumbs Ver también para PROXIMA-VISEO LIFT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
• make sure that the product load is correct and the air slots are not covered;
• defrost and clean it before starting normal operation (see chapter 11);
• make sure that the case is not exposed to sources of heat or draught;
• check that the display case is perfectly horizontal by the use of a spirit level. Make certain that
ambient conditions comply with the requirements of page 28.
Should insufficient cooling persist, resort to the nearest after-sales service.
3) The cabinet operates noisily:
• Make sure that screws and bolts are closed tight;
• Check that the display case is perfectly horizontal by the use of a spirit level.

13. AFTER-SALES SERVICE

Should it be necessary to resort to technical assistance, contact your sales person immediately. If
spare parts are needed, always refer to your after-sales service: insist on the use of original spare
parts. Scroll the Italian and European network of branch offices on the back of this manual for ad-
dresses and phone numbers.

14. DISMANTLING AND DISPOSAL

For the sake of the environment, please sort the parts and materials composing the cabinet in ac-
cordance with the waste disposal provisions in force in your country, so that they can be properly
disposed of or recycled. All its parts cannot be treated as solid urban waste, except for the metal
parts, which nevertheless are not considered as special waste by most European countries.
THE PARTS COMPOSING THE REFRIGERATING CIRCUIT MUST NOT BE SEVERED OR SEPARATED
BUT DELIVERED INTACT TO A CENTRE SPECIALISED IN RECYCLING REFRIGERANT GAS.
15. SHELVES CONFIGURATION
To ensure the correct performance that the cabinet was designed for, shelves must be arranged
inside the cabinet with an inclination on 3 different positions (0° - 10° - 21°), by moving the shelf
supporting bracket on the display case's uprights (see page 29).
PROXIMA-VISEO LIFT
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana (BL)
ITALIA Tel. 0437/9681 Telefax 0437/967434
45/66
PAGE:
UM000562
N° DOC.

Publicidad

Tabla de contenido
loading

Tabla de contenido