Bonnet Neve PROXIMA-VISEO LIFT Instrucciones De Uso Para El Usuario página 8

Ocultar thumbs Ver también para PROXIMA-VISEO LIFT:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 51
Modello - Modèle - Model
Modell - Modelo - Modelo
Fabbricante - Constructeur - Manufacturer
Hersteller - Fabricante - Fabricante
BINET.
DO NOT SPILL WATER DIRECTLY OR INDIRECTLY ON THE DISPLAY CASE (FIG. 13). DO
NOT TOUCH THE EQUIPMENT WITH DAMP OR WET HANDS OR FEET; DO NOT USE IT
WHILE BAREFOOT.
AN ELECTRICAL DIAGRAMS SHOWING THE ELECTRICAL TERMINALS FOR CONNEC-
TIONS IS ON THE INSTALLATION MANUAL.
IF A HEAT TRANSFER FLUID IS USED WE RECOMMEND YOU CHECK THE PH AND THE
CONCENTRATION OF THE SOLUTION USED AT LEAST ONCE A YEAR.
ATTENTION! BEFORE STARTING ANY MAINTENANCE OR CLEANING, DISCONNECT THE
EQUIPMENT FROM THE ELECTRICAL POWER SUPPLY USING THE MAIN WALL CUT-OFF
SWITCH.
IN CASE OF A GAS LEAK OR FIRE, DO NOT BREATHE INSIDE THE ROOM THAT HOUSES
THE DISPLAY CASE BEFORE HAVING AIRED IT PROPERLY. TURN THE DISPLAY CASE
OFF BY THE MAIN SWITCH AHEAD. DO NOT USE WATER BUT ONLY DRY EXTINGUI-
SHERS TO FIGHT THE FIRE.
THE CABINET IS NOT AIMED FOR USE BY PERSONS WITH REDUCED PHYSICAL, SEN-
SORY OR MENTAL CAPACITIES, OR BY PERSONS NOT POSESSING THE REQUIRED EX-
PERIENCE OR KNOWLEDGE, UNLESS THEY ARE SUPERVISED BY A PERSON RESPONSI-
BLE FOR THEIR SAFETY AND THEY HAVE THE RELEVANT EQUIPMENT INSTRUCTIONS
AT HAND. SURVEILLANCE MUST BE EXERCISED ON CHILDREN IN ORDER TO STOP
THEM FROM PLAYING WITH THE EQUIPMENT.
THE POWER CORDS MUST BE PROPERLY SPREAD OUT, SAFE FROM SHOCKS AND FAR
FROM LIQUIDS, WATER AND HEAT SOURCES, AND THEY MUST NOT BE DAMAGED. THE
USE OF ADAPTOR PLUGS IS FORBIDDEN. IF THE POWER CORD IS DAMAGED, HAVE IT
REPLACED BY THE MANUFACTURER, BY THE AFTER-SALES SERVICE OR BY A PROFES-
SIONAL WITH SIMILAR QUALIFICATIONS.
ENSURE THAT THE POWER SUPPLY VOLTAGE MEETS THE DETAILS ON THE RATING PLA-
TE OF THE CABINET. THE CABINET MUST BE PROPERLY CONNECTED TO THE EARTHING
SYSTEM OF THE BUILDING. BEFORE PERFORMING ANY JOBS ON THE CABINET, DI-
SCONNECT IT FROM THE POWER SYSTEM OR TURN THE MASTER SWITCH OFF.
THE EQUIPMENT AND THE CONDENSER MUST ONLY BE INSTALLED BY THE MANUFAC-
TURER'S AFTERSALES PERSONNEL OR BY A PROFESSIONAL WITH EQUIVALENT QUA-
LIFICATIONS.
DO NOT DAMAGE THE REFRIGERATING CIRCUIT: IT IS FORBIDDENT TO PIERCE OR
DRILL THE INTERNAL OR EXTERNAL WALLS OF THE CABINET IN ANY WAY (E.G. FOR
PROXIMA-VISEO LIFT
Epta Spa - Unità locale: Via degli Alpini 14 - 32020 Limana (BL)
ITALIA Tel. 0437/9681 Telefax 0437/967434
8/66
PAGE:
UM000562
N° DOC.

Publicidad

Tabla de contenido
loading

Tabla de contenido