Remington Professional S9600 Manual De Instrucciones página 5

ENGLISH
Caution: The hottest temperatures should only be used by experienced stylers
If you plan to use this straightener on the boost setting of 240ºC please test
on a small section of your hair first.
7 Recommended temperatures are indicated by the hair strand symbols on the
right hand side of the temperature display.
8 The digital display will stop flashing when the product is ready to use.
9 Working on one section at a time, run the straightener through the entire
length of the hair without stopping.
10 Only repeat twice per section to prevent damage to the hair.
11 After use, press and hold the off button to turn off then unplug the appliance.
, Temperature Boost Function:
For quick touch ups of stubborn, hard to style sections.
The temperature boost function boosts the temperature to 240°C for 30
seconds after which it will return to the previously set temperature.
Hold the '+' button for 2 seconds to operate.
Caution: the highest temperature is not suitable for every hair type. If you plan
to use this straightener on the boost setting of 240ºC please test on a small
section of your hair first.
To turn the turbo boost function off hold the '+' button for a further 2 seconds and
the product will return to the previously set temperature.
, Temperature Lock Function
Set the desired temperature by pressing +/- buttons and lock the temperature
controls by pressing the '-' button for 2 seconds. A 'padlock' symbol will appear
next to the temperature.
To unlock the temperature controls, press and hold the '-' button again for 2
seconds.
, Hinge Lock for Storage
The plates can be shut together for easy storage:
To lock, push the hinge lock up to the locked position.
To unlock, pull the hinge lock down to the unlocked position.
NOTE: Do not heat the unit in the locked position.
, Memory Function
Each time you use the product it will automatically set to the last
temperature it was used on.
5