diagrams
4 switch
1 motor unit
5 Don't use the appliance for any purpose other than those described in these instructions.
6 Don't use the appliance if it's damaged or malfunctions.
C PREPARATION
1 Unplug the appliance.
2 Lift the motor unit off the bowl. Lift the processing lid off the bowl.
3 Lower the blade unit over the spindle in the bottom of the bowl.
4 You may have to turn it slightly, to fit over the flanges on the spindle.
5 It's spring-loaded, so you'll feel some resistance as you push it down.
6 Put the food in the bowl.
a) Don't try to chip ice, don't try to chop raw meat, and take great care with the blades.
b) Don't fill above max.
c) Don't process hard foods – i.e. anything you can't cut easily with a kitchen knife.
d) Don't chop big bits – maximum 18mm cubes.
7 Align the central hole in the processing lid with the top of the blade unit, and lower the lid on
to the bowl.
8 Lower the motor unit on to the processing lid.
9 You may have to turn it slightly, to engage the top of the blade unit.
10 Put the plug into the power socket.
11 Press the switch to start the motor, release it to switch off.
12 It's best to run the motor in bursts of a few seconds at a time, and inspect the results
between bursts.
13 Don't run the motor for more than 1 minute, or it may overheat. After 1 minute, switch off for
at least 3 minutes, to let the motor cool.
C DONE?
14 Unplug the appliance.
15 Lift the motor unit off the bowl. Lift the processing lid off the bowl.
16 Put a finger on top of the blade unit, to stop it falling out.
17 Tip the processed contents out of the bowl.
18 Alternatively, hold the plastic part of the blade unit, turn it to free it from the spindle flanges,
and lift it straight up and out of the bowl.
19 Fit the storage lid to the bowl.
C CARE AND MAINTENANCE
20 Unplug the appliance.
21 Wipe the outside of the motor unit with a clean damp cloth.
22 Clean the inside of the blade unit with a toothpick.
23 Hand wash the removable parts.
` You may wash these parts in a dishwasher, but the harsh environment inside the dishwasher
will affect the surface finishes.
24 The damage should be cosmetic only, and should not affect the operation of the appliance.
ENVIRONMENTAL PROTECTION
W
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn't be disposed of with unsorted
municipal waste, but recovered, reused, or recycled.
recipes are available on our website: http://www.russellhobbs.com/ifu/550931
2 processing lid
3 storage lid
4 blade unit
household use only
3
5 bowl
6 spindle
7 flanges