Operating Elements; Safety Notes - Monacor PA-1140RCD Manual De Instrucciones

Ocultar thumbs Ver también para PA-1140RCD:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
CD/MP3 Player Insertion
with RDS Tuner
These instructions are intended for technicians in-
stalling the module and for users without any specific
technical knowledge . Please read the instructions
carefully prior to operation and keep them for later
reference .
All operating elements and connections de-
scribed can be found on the fold-out page 3 .
1

Operating Elements

1 Button EJECT to eject the CD
2 Button POWER to switch the unit on and off
3 Button MODE to switch between CD replay,
MP3 replay via the USB port (10) and radio re-
ception
4 Button BAND to select the reception bands for
the radio
5 CD slot
6 Station button 1 or
for CD / MP3 operation: Pause / Start
7 Station button 2 or
intro replay of all titles for CD / MP3 operation
8 Station button 3 or
repeat of the current title for CD / MP3 operation
9 Button AF/ REG for the function: alternative fre-
quency for RDS reception
10 USB port to insert a USB flash drive
11 Buttons TRACK / TUNE
CD / MP3: To go to the next title or to go back to
the previous title; fast forward / reverse
with the button kept pressed
Radio:
station tuning
To start the automatic station scan,
briefly press the corresponding button .
For manual station scan, keep the
button
is briefly displayed . Then adjust the
station with the button
12 Button DISP to switch the display to various in-
formation (e . g . time, programme type, ID3 tags)
13 Display
14 Station button 4 or random replay for CD / MP3
oper ation
15 Station buttons 5 and 6 or folder selection for
CD / MP3 operation
16 Button PTY to select the programme type for
RDS reception
17 Volume control LEVEL
or
pressed until MANUAL
or
.
2

Safety Notes

The insertion module corresponds to all relevant
directives of the EU and is therefore marked with
The insertion is suitable for indoor use only . Pro-
tect it against dripping water and splash water,
high air humidity and heat (admissible ambient
temperature range 0 – 40 °C) .
Do not set the unit with the installed insertion into
operation, and immediately disconnect the mains
plug from the mains socket if
1 . there is visible damage to the insertion, the unit
or to the mains cable,
2 . a defect might have occurred after a drop or
similar accident,
3 . malfunctions occur .
The insertion or the complete unit must in any
case be repaired by skilled personnel .
For cleaning only use a dry, soft cloth; never use
chemicals or water .
No guarantee claims for the unit and no liability
for any resulting personal damage or material
damage will be accepted if the insertion is used
for other purposes than originally intended, if it
is not correctly installed or operated or if it is not
repaired in an expert way .
If the insertion is to be put out of opera-
tion definitively, take it to a local recycling
plant for a disposal which is not harmful
to the environment .
3
Applications
The insertion module is suitable for installation into
PA amplifiers from MONACOR with an insertion
compartment and into MONACOR extensions, for
example:
PA-1120
PA amplifier for 5 zones
PA-1240
PA-1200
PA amplifier for 4 zones
PA-1200EX
Extension for 2 modules
PA-5240
PA amplifier for 5 zones
PA-5480
PA-6240
PA-6480
PA amplifier for 6 zones
PA-6600
.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido