Bosch ROTAK 34 Manual Original página 14

Ocultar thumbs Ver también para ROTAK 34:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
F 016 L70 636 - Buch Seite 2 Freitag, 27. November 2009 9:44 09
Remove the plug from the socket:
– whenever you leave the machine
– before clearing a blockage
– before checking, cleaning or working on the lawn-
mower
– after striking a foreign object. Inspect the lawn-
mower for damage and make repairs as neces-
sary
– if the lawnmower starts to vibrate abnormally
(check immediately).
Technical data
Lawnmower
Part number (typ)
Rated power
Blade width
Height of cut
Grassbox capacity
Weight (max.)
Protection class
Serial Number
Note: Please observe the order number of your machine. The trade names of individual machines can vary.
Inrush currents cause short-time voltage drops. Under unfavourable power supply conditions, other equipment may be af-
fected. If the system impedance of the power supply is lower than 0.36 Ohm, disturbances are unlikely to occur.
Intended Use
This product is intended for domestic lawn mowing.
Introduction
This manual gives instructions on the correct as-
sembly and safe use of your machine. It is important
that you read these instructions carefully.
When fully assembled the machine weighs approxi-
mately between 11.0 and 13.5 kg. If necessary, ob-
tain assistance to remove from packaging.
Take care when carrying the mower to the lawn, as
the blades are sharp.
Delivered Items
Carefully remove the machine from its packaging
and check that you have all the following items:
– Lawnmower with handle assembly
– 1 Handle bottom
– 2 Bolts
– 2 Wing nuts
– 2 Screws
– 2 Grassbox parts (ROTAK 34/37)
– 3 Grassbox parts (ROTAK 40/43)
14 • F 016 L70 636 • 09.11
Keep all nuts, bolts and screws tight to be sure
that the lawnmower is in safe working condition.
Check the grass catcher frequently for wear or
deterioration.
Replace worn or damaged parts for safety.
Ensure replacement parts fitted are Bosch ap-
proved.
Always wear gardening gloves when handling or
working near the sharp blade.
ROTAK 34
ROTAK 37
3 600 H81 A.. 3 600 H81 B.. 3 600 H81 C.. 3 600 H81 D..
[W]
1300
1400
[cm]
34
37
[mm]
20 – 70
20 – 70
[l]
40
40
[kg]
11.0
11.2
/ II
See serial No 13 (rating plate) on machine.
– 2 Cable clips
– Cable restraint (if supplied separately)
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
Operating Controls
1 Switch lever
2 Safety button
3 Handle top
4 Cable restraint**
5 Mains plug**
6 Grassbox
7 Deflector guard
8 Handle bottom
9 Ventilation slots
10 Wheels
11 Grass comb
12 Height of cut lever
13 Serial Number
**Country specific
Not all of the accessories illustrated or described are
included as standard delivery.
English - 2
ROTAK 40
1600
40
20 – 70
50
13.2
/ II
/ II
ROTAK 43
1700
43
20 – 70
50
13.5
/ II

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Rotak 37Rotak 40Rotak 43

Tabla de contenido