Simons Voss Technologies SREL2.COVER1 Instrucciones De Montaje página 9

· Seal the cable gland yourself under your own responsibility (in the
case of non-.WP versions). We recommend using suitable materials
such as silicon or other resistant sealing materials.
· frame: aSa gf15 (acrylonitrile/styrene/acrylic ester, 15% glass-fibre
reinforced); colour similar to ral 7011 iron grey.
· insert: polycarbonate, transparent, uV-resistant
· Base plate: V2a stainless steel
· Screws for frame on base plate: safety screws (spanner head, already
fastened into position in frame)
· Corresponding screwdriver bit 1/4"x25 SP4 (enclosed)
· fastening the Srel.W / SC.m.e.W (.WP): hexagon socket screw,
din 912, m4 x 8 mm, a2 (already screwed into base plate)
· mounting screws for base plate (enclosed): 5.0 x 50 mm, 8 mm wall
plug (preferably half-round head screws)
· iP54
Subject to technical changes. You can find more detailed technical infor-
mation in the system manual or at www.simons-voss.com
9