CXS LONDON Información Para El Usuario página 13

3
1 „limited period of wear"
Material composition: top layer: 100% polyester Oxford 300D x 300D with polyurethane (PU)
coating; filling and lining: 100% polyester.
Reflective strips: TM9 - 100% polyester coated with silver reflective colour.
DERBY 1110 002 XXX XX, Pictograms, tests carried out:
2
max 30x
Material composition: knitted fabric with TPU and fleece (3 softshell layers), material composition:
100% polyester. Reflective strips: CSR 1303, 100 % polyester coated with silver retroreflective
colour.
LONDON 1110 001 XXX XX, CAMBRIDGE 1110 004 200 00, OXFORD 1110 005 155 00, DERBY 1110 002 XXX XX
EN 343 - recommended period of wear:
The following table provides information that clarify impact of penetrability for water vapour for
recommended uninterrupted period of wearing the clothes at various temperatures.The maximum
recommended uninterrupted period of wearing of the complete set of clothes consisting of jacket
and trousers without insulating lining.
Class
Work environment
temperature in ˚C
25
20
15
10
5
„-" means: unlimited period of wear
The table applies for medium physical load, M = 150 W/m2, for a standard person, relative air
humidity 50%, and wind speed (airflow)
va = 0,5 m/s.
The period of wearing may be extended if the clothes are provided with effective air holes and/
or they are worn with breaks.
EN ISO 20471 - minimum required area of conspicuous material in m2
Underlying material
Retroreflective material
The clothes conform to the basic hygienic and safety requirements in accordance with the
Regulation (EU) 2016/425 and other mentioned standards. Personal protective equipment of
category II.
EN ISO 13688:2013
EN ISO 20471:2013
EN 343:2003+A1:2007/AC:2009-11
Identification of the Notified Body that carried out the conformity assessment:
Institut pro testování a certifikaci, a.s. (Institute for testing and certification), Tř. T. Bati 299, 764 21
Zlín-Louky, CZ, Notified body no. 1023.
Restricted use: To provide the right protection level, as specified above, the clothes must be always
EN 343+A1:2007
Class 3 – resistance against penetration of water Wp.
Class 1 – resistance against penetration of water vapour Ret "limited
period of wear" see the table of recommended periods of wear.
EN ISO 20471:2013 Class 2 – based on the area of conspicuous
materials.
Maximum number of washing cycles during which the clothes
preserve their reflective properties.
1) Ret above 40 min.
60
75
100
240
-
Clothes of class 3 Clothes of class 2
0,80
0,20
10
2) 20<Ret ≤ 40 min
105
250
-
-
-
Clothes of class 1
0,50
0,13
3) Ret ≤ 20 min
205
-
-
-
-
0,14
0,10