CXS LONDON Información Para El Usuario página 14

worn buttoned up. The clothes must not come into contact with liquid chemicals, particularly with
dissolving agents and fire. It is also necessary to avoid excessive mechanical damage, particularly
retro-reflective parts (tearing, braking off etc.).
Transportation, packaging type: The products are packed in PE bags. The products must not be
damaged during their transportation.
Storage: Do not store in places with direct sun. Store the clothes in closed, dry, well ventilated
stores. Protect them against radiant heat of heating devices. They must be stored not closer than 1
m at least from heating bodies. If the clothes are wet, leave them to dry out at room temperature
and then store them.
Sizes: Sizes corresponding to the prescribed intervals in accordance with EN ISO 13688:2013.
The clothes are manufactured in the standard height 170-182cm. Permitted tolerance of deviations
in dimensions is +4 and –3%.
Maintenance and cleaning:
The user finds the product maintenance symbols on sewn-on label.
How to maintain at home: Not more than 25-30 washing cycles; washing as a synthetic material with
max. temperature of 40 °C; do not use any BIO laundry detergents; considerate handling; rinsing in
cold water; short spinning; no bleaching; no tumble drying; no ironing; no chemical cleaning. Do
not use fabric softener.
Manual cleaning of reflective strips:
1. Water 40 °C - soft cloth, sponge or soft brush.
2. Considerate laundry detergent or cleaning agent.
3. Rinse the clothes after cleaning and leave them to get dried.
The maximum number of washing cycles applies only for the properties related to high visibility.
Warning:
Check the clothes' condition visually before every use. The clothes must be kept clean to remain
functional. If they are dirty or pale, replace them immediately!!!
If integrity of the clothing becomes disrupted (rupture, wearing out, material excessive thinning,
unstitched seams etc.), the degree of protection is lower and the product becomes inconvenient in
accordance with above specified legal and technical regulations.
Repair them only using the materials and fabrics that meet the requirements of the respective
standard.
The protection class is determined based on the area of visible material; therefore marking of the
clothes on their surface is restricted or limited.
If you use the vest separately, then do not forget to take into account that it has different
classification of reflective clothes than the jacket.
If the product is used, kept, or treated differently than as specified here in this document, it may be
destroyed or its functions may be changed.
The above-specified maximum number of washing cycles is not the only factor related to the life of
the clothes. The clothes' life will depend on their using, storing etc.
Wearing the hood may impair sharpness of hearing and peripheral vision.
No warning clothing can guarantee absolute visibility in any situation.
The vest does not protect the user against adverse weather conditions (eg rain, snow, fog and
ground humidity).
If the clothing is used when strictly following the specified purpose, then there are no hazards that
could endanger the user's health (the product must not be used in the circumstances that require
other types of protective functions, e.g. protection against heat hazards, clothing caught by moving
parts of a machine etc.).
Disposal: Disposal of clothes is regulated by legislation of individual countries or by local
regulations. Disposal by burning.
The Declaration of Conformity can be found here: www.canis.cz; for individual products, in the bar
"Documents to download".
Marking: Sewed-in label (sample)
Type of product
Category of product
Conformity mark
11