Eu Declaration Of Conformity - Sprintus Titan Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Contents
Before Startup ....................................................................4
Safety instructions.......................................................... 4-5
Symbols in the operating instructions ................................4

EU declaration of conformity .............................................5

Operation ................................................................... 30-33
Technical specifications ....................................................34
Accessories and Spare Parts .............................................36
Warranty ......................................................................... 38
SAFETY
WARNING!
Risk of injury!
m This apparatus is not to be used by people (children
included) with reduced physical, sensorial or mental
capacities or without any experience and knowledge,
unless they did not receive instructions relative to the
use of the apparatus and are controlled by a person
responsible for their safety.
m Children should be controlled so that they didn't play
with the apparatus.
m The packaging components could constitute potential
dangers (as or example plastic bags): they must be kept
away from children's reach and from other people not
conscious of their actions.
m Any different use from that indicated in this manual could
constitute a danger, therefore, it must be avoided.
m Every part of the apparatus must be correctly assembled
before sing it.
m Ensure that the socket conforms to the apparatus' plug.
m Ensure that the voltage indicated on the motor block
corresponds with the power that is intended to connect
the apparatus to.
m Make sure that the machine is switched off before
plugging the power cord in.
4 I
Safety English
Please read carefully the instruction manual and safety
instructions before using.
Failure to observe the instruction-manual and safety
instructions may cause damage or danger to the operator and
other persons.
The orbital-single disc machine is characterized by its easy
operation. The orbital drive provides effective cleaning and
trouble-free, safeguarding control.
The standard water tank and the toolless disk change make
work trouble-free.
The complete accessory package enables hard surfaces
to be cleaned or polished as well as for carpets to be
shampooed.
Symbols in the operating instructions
WARNING!
Risk of injury!
WARNING!
Danger of electric shock!
Do not use highly foaming detergents.
m The apparatus is not suitable for areas protected against
electrostatic discharges.
m Use only the brushes supplied with the apparatus or
those specified in the instruction manual. Using other
brushes could jeopardize safety.
m When operating the rotating parts, (e.g. brush, disc wheel,
etc.) a danger exists when running over the power supply
line or extension cords, or even coming into contact with
them. The cable could be damaged with substantial risk
caused to the machine and to the user.
m Don't leave the apparatus unattended while is in function.
m The operator must ensure that no objects that can be
sucked in or thrown away by the rotating disc are present
in the working area.
m The operator must wear tight-fitting clothes to avoid being
trapped by rotating parts (no neck ties, no long wide
skirts, etc).
m Only a properly mounted tank allows a non-hazardous
operation. – To fill the tank, switch the appliance off,
pull the mains plug and make sure that no liquids are
spilled on the device.
WARNING!
Danger of electric shock!
c Do not ever pull or lift the apparatus through the electrical
cable.
c Do not immerge the apparatus into water and neither use
water jets to clean it.
c Always remove the plug from the current socket before
undertaking any type of intervention on the apparatus
or if it is left unattended or within children or people's
reach not quite conscious of their own actions.
c Regularly control the feeding cable looking for damages,
cracks or ageing. Substitute the cable before using it
further.
c If the feeding cable is damaged it must be substituted by
the manufacturer or by its after sales service or in any
case by a similarly qualifi ed person, thus preventing any
possible risk.
c When using extension electric wires ensure that they are
lying on dry surfaces and protected against possible
water jets.
WARNING!
Risk of injury!
m Specialized personnel must always carry out
maintenance and repairs; any damaged part must be
substituted with original spare parts.
m It is forbidden to carry out changes to the apparatus.
Tampering could cause fires and damages even lethal
to the user and the forfeiture of the guarantee.
m The manufacturer declines any responsibility for damages
caused to people or things due to non-compliance with
these instructions or if the apparatus is unreasonable
used.
Do not dispose of power tools into household
waste! According to the European Directive
2012/19/EU on waste electrical and electronic
equipment (WEEE) and its incorporation into
national law, power tools that are no longer suitable for use
must be separately collected and sent for recovery in an
environmental- friendly manner.
Old appliances contain valuable materials that can be
recycled. Please arrange for the proper recycling of old
appliances. Batteries, oil, and similar substances must not
enter the environment. Please dispose of your old
appliances using appropriate collection systems.
EN
EU Declaration of conformity
We declare that the machine described below complies
with the relevant basic safety and health requirements
of the EU Directives, both in its basic design and
construction as well as in the version put into circulation
by us.
This declaration shall cease to be valid if the machine is
modified without our prior approval.
Product: Excenter Single disc machine
Type:
Titan (207.0XX)
Relevant EU Directives
2014/35/EU
2014/30/EU
Applied harmonized standards
CE-LVD + CE-EMC
EN-60335-1: 2012+A11: 2014+A13: 2017
EN 60335-2-67: 2012
EN 62233: 2008
EN 55014-1: 2017
EN 55014-2: 2015
EN 61000-3-2: 2014
EN 61000-3-3: 2013
SPRiNTUS GmbH, 73642 Welzheim / Germany
09/2019
Holger Lepold
Managing Director
Safety English
I 5

Publicidad

Tabla de contenido
loading

Tabla de contenido