English - Kenwood A936 Manual De Instrucciones

Before reading, please unfold front page showing the illustrations
spanner
ring nut
screens
scroll
body
feed tube
measuring cup
cleaning tool
before using for the first time
Wash the parts: see 'cleaning'.
safety
Dough made too dry or fed through
too quickly can break your pasta
maker. Follow the dough recipes
supplied.
Only use the spanner handle to push
dough down the feed tube. And
don't push too hard.
to assemble
1 Optional: for easier pasta making,
warm the parts in hot water. Then
dry thoroughly.
2 Fit the scroll inside the body.
3 Fit a screen
over the pins. The screens are
numbered:
spaghetti
macaroni
rigatoni
tagliatelle
lasagne
large macaroni
4 Loosely fit the ring nut.
to use your pasta maker
1 Make your pasta dough. Follow one
of the dough recipes supplied - a
too-dry mix could break your
pasta maker.
2 Remove the slow speed outlet cover:
slide the catch
3 Hold the catch back and insert the
pasta maker - feed tube towards
you. Turn it both ways until it locks
into place.

English

- put the notches
1
2
3
4
5
6
, then pull .
4 Tighten the ring nut.
5 Switch to speed 3.
6 Drop small pieces of the mix at a
time into the feed tube
scroll to clear before continuing. You
can push them down gently using
the spanner handle: (don't use
anything else or push too hard
- your pasta maker could
break).
The first batch will come out curly;
the second will be straighter. (You
can reprocess the first batch.)
7 When the pasta is long enough, cut
to the desired length
To change screens, remove the ring
nut and switch briefly to speed 1 to
eject the screen.
Cook macaroni and rigatoni within 4
hours. Otherwise they become brittle
and snap.
to cook your pasta
1 Bring a pan three quarters full of
water to the boil. Add salt to taste.
2 Add your pasta and gently boil for 3-
8 minutes, stirring occasionally.
For lasagne and tagliatelle, cook the
full quantity of pasta in two batches.
cleaning
1 Loosen the ring nut manually or with
the spanner
2 Use the cleaning tool to remove all
dough.
Allow the dough to dry in the
screens before using the cleaning
tool.
3 Wash in hot, soapy water or on the
top rack of your dishwasher.
2
, allow the
.
and dismantle.