DiO BELL-B01 Guia De Inicio Rapido página 41

Note
In order to reset the device, press and hold the reset button for 5 seconds.
The doorbell rings when the process is complete.
Flashing red light (slow)
Flashing red light (fast)
Constant blue light
Flashing blue light
4. Configuring the doorbell
A. Adding the doorbell in the app
Step 1
Connect your smartphone to the WiFi network
Step 2
Download the DiO one app from the Apple Store or the Android
Play Store, depending on your device.
Step 3
Run the DiO one app and register when you use it for the first
time.
Step 4
Follow the steps described in the app to add your doorbell.
Note : Only Wi-Fi access point mode is available for the DIOBELL-B01,
please follow the on-screen instructions for pairing.
Note
- If you have multiple doorbells, please repeat step 4 to add them one by
one.
- To change the WiFi network, restore the camera's factory settings and
follow step 4 to add the doorbell.
For more detailed information, you can download the user manual from
www.chacon.com
Waiting for configuration
Searching for WiFi
Camera connected to WiFi
Access point mode