BEARWARE 303526 Manual página 14

3. Product details
5 hours
4 hours
4. Initial use
Take the appliance out of the package and remove all the packaging material.
Check the scope of delivery for completeness and damage.
Connect the appliance to a properly installed socket. Connect a desired device
that you want to control with the countdown timer. Proceed as follows to start
the countdown:
1. Press the "SET" button once. The first LED then starts glowing. The count-
down is now set for one hour.
2. Press the "SET" button twice. The first and second LEDs start glowing simul-
taneously. The countdown is set for two hours.
3. Press the "SET" button three times. The first three LEDs start glowing simul-
taneously. The countdown is set for three hours.
4. Press the "SET" button four times. The first four LEDs start glowing simulta-
neously. The countdown is set for four hours.
5. Press the "SET" button five times. The first five LEDs start glowing simulta-
neously. The countdown is set for five hours.
6. Press the SET button again to switch the power off.
14
"SET" button
3 hours
1 hour
2 hours
English