Instrumax SNIPER 50 PLUS Manual Del Usuario página 6

6
ment is substracted from the previous one.
The result is displayed in the main line. Previous value is dis-
played in the lines 1 and 2.
Area
Press the button (3) once.The symbol
Press button (4) to take the irst measurement (for example,
length). Measured value is displayed in the second line.
Press button (4) to take the second measurement (for exam-
ple, width). Measured value is displayed in the second line.
First measurement is displayed in the irst line. The result of
measured area is displayed in the main display area.
Addition / Subtraction of areas
Measure the area.
Press button (2) to enter into the Addition mode. Area value is
displayed in the second line.
Press button (4) to take the irst measurement (for example,
length).Press button (4) to take the second measurement (for
example, width).
After the completion of area, press button (4), the result of
substraction of areas is displayed in the main display area.
If the measurements are not inished, press button (2 or 6) to
continue calculations.
Volume
is displayed.
For volume measurements, press button (3) twice until the in-
dicator
Press button (4) to take the irst measurement (for example,
length). Measured value is displayed in the second line.
Press button (14 to take the second measurement (for exam-
ple, width). Measured value is displayed in the second line.
First measurement is displayed in the irst line.
Press button (4) to take the third measurement (for example,
height). Measured value is displayed in the intermediate irst
line.
The volume value will be displayed in the main display area
and the previous area value is displayed in the irst line.
for volume measurement appears on the display.