Installation Declaration - Leister LE MINI Instrucciones De Funcionamiento

Ocultar thumbs Ver también para LE MINI:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32

Installation declaration

(As defined by the EC Machinery Directive 2006/42/EC; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that
the incomplete machine
Designation:
Type:
– insofar as is possible from the scope of supply – corresponds to the applicable fundamental requirements of the
EC Machinery Directive (2006/42/EC).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised
standards:
We furthermore declare that the special technical documents pursuant to Annex VII (Part B) have been compiled
for this incomplete machine and that we are committed to communicate these electronically to the market
surveillance authorities upon justified request.
Name of the documentation officer: Volker Pohl, Manager Product Conformity
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in
which the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive
(2006/42/EC).
Kaegiswil, 09.02.2016
Disposal
Electrical equipment, accessories and packaging should be recycled in an environmentally friendly way.
For EU countries only: Do not dispose of electrical equipment with household refuse!
12
Air heater
LE Mini 400; LE Mini 400 Sensor
LE Mini 800; LE Mini 800 Sensor
Electromagnetic Compatibility it 2004/108 (until 19.04.2016), 2014/30 (starting 20.04.2016)
Low Voltage Directive 2006/95 (until 19.04.2016), 2014/35 (starting 20.04.2016)
RoHS Directive 2011/65
EN 12100, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2,
EN 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
Andreas Kathriner, GM

Publicidad

Tabla de contenido
loading

Tabla de contenido