Display And Control Elements - SPIT AC 1630 P Instrucciones Para El Manejo

3

Display and control elements

Switch position Function
0 Vacuum cleaner is switched off
I Vacuum cleaner is running
A Ready for operation
Ready for operation
AC
Automatic shaker function
Automatic filter cleaning function
Fill level indicator*
Speed regulation*
Setting the suction hose diameter *
(*depending on the equipment variant of your vacuum cleaner)
10
Description
- Plug socket current-conducting
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function off
- Plug socket current-conducting
- Automatic shaker function on
- The vacuum cleaner is switched on and off via the connected electri-
cal/compressed air tool* at the plug socket.
- Automatic shaker function on; 2min
- When the container is full and/or there is a blockage in the suction
hose, the full indicator lights up. On the M and H vacuum cleaners, an
acoustic signal is also emitted.
- The suction performance can be regulated using the speed regulato
- On M-/H-/H-asbestos vacuum cleaners for volume fl ow monitoring, to
trigger an audible warning signal if the air speed falls below 20 m/s