Instruction Manual; General Safety Instructions; Overview Of The Components - CTC BR 816 Manual De Instrucciones

Instruction Manual

Thank you for choosing our product. We hope you enjoy
using the device.
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is
essential to comply with these instructions in order to avoid
accidents and prevent damage to the machine:
WARNING:
This warns you of dangers to your health and indicates
possible injury risks.
CAUTION:
This refers to possible hazards to the machine or other
objects.
NOTE: This highlights tips and information.

General Safety Instructions

Read the operating instructions carefully before putting the
appliance into operation and keep the instructions including
the warranty, the receipt and, if possible, the box with the in­
ternal packing. If you give this device to other people, please
also pass on the operating instructions.
• To avoid the risk of fire or electric shock, you should not
expose the device to rain or humidity. Do not use the
device near water (e.g. bathroom, swimming pool, humid
cellars).
• Do not use the unit in extremely hot, cold, dusty, or damp
places.
• The unit is designed solely for private use and its intended
purpose. This unit is not designed for commercial use.
• Make sure that the power cable is not bent, pinched, or
comes into contact with heat sources.
• Make sure that the power cable is not a tripping hazard.
• The power supply unit is only suitable for use in dry rooms.
• Never touch the power supply unit or the cable with wet
hands.
• Only connect the power supply unit to a properly installed
wall outlet. Ensure that the listed voltage matches the volt­
age of the wall outlet. Also ensure that the output current,
voltage and the polarity of the power supply unit match the
information on the connected device.
• Always observe the polarity when exchanging the
batteries.
• Avoid covering the device's vent openings.
• Never cover the vent holes with objects, such as maga­
zines, tablecloths, curtains etc.
• Open sources of fire, such as e.g. burning candles may
not be placed onto the unit.
• Never open the device's case. Improper repairs can cause
severe danger to the user. If the device or particularly the
power cord is damaged, don't use the device any further
20
BR816_IM_CTC_new
and have it repaired by a qualified specialist. Check the
power cord regularly for damage.
• If you do not use the device for a long period of time, pull
the power supply unit from the wall socket and/or remove
the batteries.
• Disconnect the unit from the power supply for cleaning or
if a fault occurs.
• To ensure the splash­water protection (IPX 4), keep the
rubber cover closed at all time.
These symbols may be found on the machine and are
intended to indicate the following:
The lightning symbol should advise the user of
parts in the inside of the device which carry dan­
gerously high voltage levels.
The symbol with an exclamation mark should ad­
vise the user of important operation or mainte­
nance instructions in the accompanying documen­
tation.
Children and Frail Individuals
• In order to ensure your children's safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of
their reach.
WARNING:
Do not allow small children to play with the foil. There is
a danger of suffocation!
• This device is not intended to be used by individuals
(including children) who have restricted physical, sensory
or mental abilities and / or insufficient knowledge and/or
experience, unless they are supervised by an individual
who is responsible for their safety or have received
instructions on how to use the device.
• Children should be supervised at all times in order to
ensure that they do not play with the device.

Overview of the Components

1 Volume control (VOLUME MIN / MAX)
2 Carry handle
3 Function selector (OFF / FM / AM)
4 Speaker
5 Status indicator (POWER)
6 Frequency selector (FM / AM)
7 FM antenna
8 AUX­IN socket
9 6 V DC IN socket
10 Battery compartment
Start-Up of the Device / Introduction
• Choose a suitable location for the device. Suitable would
be a dry, level, non­slip surface.
• Sensitive surfaces may be protected by plastic foil.
Remove this foil.
• Make sure the device is vented sufficiently!
23.05.17