Thank you for purchasing a BelleCore bodybuffer. Please read and follow
instructions carefully before you begin using the bodybuffers. Please keep
this instruction manual handy for future reference.
INSTRUCTIONS FOR USE
• For best results, use before a shower or bath on dry skin. Do not apply creams
or gels before treatment. Be sure the device button is in the "off" position before
inserting the plug into the electrical outlet. Do not switch on in mid-air, always place
firmly against the body before operating.
• After plugging the power cord into the power supply and the outlet, hold the device
securely and place it directly onto the dry skin in the area of the body you desire to
treat, then press the on button.
• While applying steady pressure move the device in circular and side to side fashion,
up and down and all around- maintaining constant motion while firmly massaging
the tissue. See enclosed photos for more information on how to correctly use
BelleCore bodybuffers.
• BelleCore bodybuffers should always be used on dry skin, before taking a shower or
a bath. Treat each desired area for 3-5 minutes twice a day. Do not use on one area
for more than 10 minutes.
• Use it to warm up your muscles prior to a work-out or afterwards to soothe sore
muscles and flush out any toxins.
• For optimal results, apply the Fit Hydrating Crème to the treated areas after each use
and/or after showering.
• For additional information and to reorder Crème, please visit our web site at
www.bellebodybuffer.com
INSTRUCTIONS FOR CARE
• Always unplug BelleCore bodybuffers from the outlet and/or the power supply when
not in use. Store in a dry, cool place. Do not leave unattended when plugged in.
• Keep out of the reach of small children.
• Never submerge in any liquid.
• To clean, gently wipe with damp soft cloth. Do not use abrasive sponges,
cleansing agents or solvents.
• If desired, hand wash the bonnet with mild detergent and air dry.
• Never try to repair BelleCore bodybuffers. There are no user-serviceable parts.
7