nedis WIFICBI10WT Guia De Inicio Rapido página 6

Prepare the security camera [Image B]
4
Use a microSD card with a minimum of 8 GB and a maximum of 128 GB.
1. Insert the new microSD card into the microSD card slot
2. Connect the USB cable
3. Connect the USB cable
4. Connect the USB power adapter to the mains. The charging indicator LED
will turn red.
5. Press and hold the power button
status indicator LED
Installation of the Nedis SmartLife app
1. Download the Nedis SmartLife app for Android or iOS on your phone via
Google Play or the Apple App Store.
2. Open the Nedis SmartLife app on your phone.
3. Create an account with your mobile phone number or your e-mail address
and tap Continue.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Connect to the security camera
1. Tap + in the Nedis SmartLife app.
2. Select the device type you want to add from the list.
3. Confirm the status indicator LED is blinking.
4. Enter the Wi-Fi network data and tap Confirm.
The product is now ready for use.
4
If the camera is not found, try again but this time, after step 2, tap Otherwise
(upper right corner) and select QR code. Enter the Wi-Fi network and Confirm.
5. Tap Continue and a QR-code will appear.
6. Hold your phone with a 15 – 20 cm distance in front of the camera.
If the camera has detected the QR-code, you will hear a sound.
7. Tap to confirm you heard the sound.
8. Give the camera a name and tap Done. The status indicator LED
blue.
The product is now ready for use.
r
to the micro USB port
r
to a USB power adapter (not included).
4
for 5 seconds to turn on the device. The
9
will start blinking red.
6
w
.
6
.
9
q
will turn