Listening To The Radio - Teac SL-D96 Manual Del Usuario

1
2
3
4
36
2 3
1 4

Listening to the Radio

1
Press the POWER switch to turn the unit ON.
2 Press the TUNER button to select "TUNER".
Or, press the FUNCTION button repeatedly to select
"TUNER", when using the remote control unit.
3 Press the FM/AM button to select FM or AM.
Use the BAND button, when using the remote
control unit.
4 Select the station you want to listen to (auto
selection).
Move the TUNING knob up or down until the
frequency display begins to change.
When a station is tuned in, the tuning process will
stop automatically.
< Turn the TUNING knob to stop the auto selection.
< Use the TUNING button, when using the remote
control unit.
Selecting stations which cannot be tuned
automatically (manual selection).
Tap the TUNING knob up or down to change the
frequency in small increments. Release it when the
station you want to listen to is found.
Use the TUNING button, when using the remote
control unit.
If the reception is poor
AM broadcast
Turn around the unit to find the best position for
AM stations.
FM broadcast
For a good reception, turn around the antenna so
that you can get the stations clearly.
ENGLISH