Technical Data - BLACK&DECKER KG65 Manual De Instrucciones

• The product has not been subjected to misuse
or neglect.
• The product has not sustained any damage through
foreign objects, substances or accidents.
• Repairs have not been attempted by anyone other
than our authorised repair distributors.
This guarantee is offered as an extra benefit and is
additional to your statutory rights.
AFTER SALES SERVICE FOR YOUR BLACK & DECKER
PRODUCT (UK, AUSTRALIA AND NEW ZEALAND ONLY)
Black & Decker offers a nationwide network of authorised
service agents. The use of other than genuine
Black & Decker accessories and parts may damage or
reduce the performance of your Black & Decker
product and may also endanger the user. The terms
and conditions of the warranty may also be effected.
OUR AFTER SALES SERVICE POLICY (UK, AUSTRALIA
AND NEW ZEALAND ONLY)
It is our aim that all Black & Decker customers should
be totally satisfied with their Black & Decker product
and after sales service, but if help or advice is needed
please contact a local Black & Decker authorised
repair agent manager who will be happy to help.
Full details of our unique after sales service can be
obtained from any of our Black & Decker authorised
repair agents.
ACCESSORIES
The performance of any power tool is dependent upon
the accessory used. Black & Decker accessories are
engineered to high quality standards and are designed
to enhance the performance of the power tool. Buying
a Black & Decker accessory will ensure that you get
the very best from your Black & Decker power tool.
Black & Decker accessories available include metal
and stone cutting discs, grinding discs, wire brushes
and sanding discs.

TECHNICAL DATA

The level of sound pressure of this tool is in
accordance with EEC legislation. You must wear ear
protection when using this tool.
KG65
Disc diameter 115mm
Power input 650W
No load speed 11,000rpm 11,000rpm 10,000rpm
Spindle size M14
Cable length 3m
* Not available in the UK.
KG72 KG90*
115mm 125mm
720W 800W
M14 M14
3m 3m
FEATURES
6 •
•
5
1. Slider switch
2. Cable
3. Wheel guard
4. Body grip
5. Side handle (2 positions)
6. Spindle lock button (KG72/KG90 only)
OPERATING YOUR ANGLE GRINDER
forward and push the front down until it locates in the
lock position. To switch your angle grinder off, press
the rear of the slider switch. Spring action returns the
switch to the off position.
ADJUSTING THE WHEEL GUARD
Adjust the guard to protect your hands and to direct
grinding debris.
Disconnect the plug from the electricity supply.
FITTING THE DISCS
Grinding and finishing
Use a rigid abrasive disc with a depressed centre for
surface grinding and finishing. The maximum diameter
ENGLISH
2
•
• 4
• 1
5
•
•
3
To switch your
angle grinder on,
push the slider
switch forward.
For continuous
operation, push
the slider switch
Loosen the clamp
bolt. Position the
guard at the
required angle.
Always tighten
the clamp bolt.
21