Picture Settings - Prestigio RoadRunner Guia De Inicio Rapido

Quick Start Guide
Prestigio RoadRunner
Getting started
Start recording
1. Insert a micro SD card (not included).
2. Connect the device to the car charger. When the car engine
starts, the device will begin loop recording.
Taking photos
• Press [ ] to select the picture mode, and then press [OK]
to take photos.
Settings
In preview mode, press and hold [OK] to enter settings. Use
[ ]/[ ] to navigate the menu.
Video settings
• Resolution: Select the resolution of recorded video:
1080FHD / 1920x1080, 1080P / 1440x1080, 720P /
1280x720, WVGA / 848x480, VGA / 640x480, QVGA /
320x240.
• Loop recording: Set the video duration for loop recording.
When the micro SD card is full, the device will delete the
first unlocked video file automatically.
• Motion detection: Turn on or off motion detection. If there
is any motion detected while the car engine is stopped,
your car DVR will start recording automatically.
• G-sensor: Select the sensitivity of the G-sensor.
PCDVRR519I & 520I_QSG v1.2.indb 1

Picture settings

• Capture mode: Select the capture Mode from Single /2S
Timer/ 5S Timer/ 10S Timer.
• Resolution: Select the picture image size from 12M /
4032x3024, 108M / 3264x2448, 5M / 2592x1944, 3M /
2048x1536, VGA / 640x480, 1.3M / 1280x960.
• Burst: Select to turn the burst on or off.
• Quality: Select quality from Fine / Normal / Economy.
General settings
In preview mode, press and hold [OK] twice to enter general
settings.
Playback and media connection
Playback mode
In preview mode, press [ ] to select playback mode.
1. Press [ ]/[ ] to scroll through the files.
2. Press [OK] to start playback.
3. Press [ ] again to exit playback mode.
Note:
While viewing the file list, you can press and hold [OK] to
select to:
• Delete one file or all the files.
• Protect or unprotect the selected file.
6/4/2015 4:06:24 PM