Volume Adjustment - Denver BTS-110NR Manual De Instrucciones

SD port (2), the speaker will start playback of the music automatically.
3. USB Mode, if a USB-type memory card is inserted into the USB port (3), the
speaker will start playing songs automatically.

VOLUME ADJUSTMENT

Press and hold the Volume - (5), Volume + (6) to decrease or increase the
volume.
AUX IN
1. Turn on the speaker.
2. Connect the aux-in cable to the AUX IN jack (4) of the speaker and the other
end to the external device.
3. Then you can start to play music from the external device.
USE MICRO SD CARD/USB CARD
1. Turn on the speaker.
2. Insert a Micro SD card into the micro SD port (2) with holding the contacts
facing the USB plug or insert a USB memory card into the USB port.
3. The music will be played automatically.
4. Press once the Volume-/Previous Track button (5) button to skip to the
previous track; press the Volume +/Next track button (6) to move to the next
track.
5. Press the button (8) to pause or resume the playback.
BLUETOOTH OPERATION
PAIR THE DEVICES
1. Place the speaker next to the Bluetooth device to be paired.
2. Turn on the speaker and press the MODE button (7) to enter the bluetooth
mode.
3. Follow the instructions of your device to search the speaker.
4. The speaker name is "Denver BTS-110NR" and will be displayed on your
Bluetooth device list, select it and enter the password of "0000" if required.
5. When paired successfully, you can stream music from your Bluetooth device
to the speaker.
Notes:
- The Bluetooth speaker only can connect to one Bluetooth device at a time,
and the connection cannot be interrupted during operation.
ENG-2