Boiling Eggs To Same Hardness - Silvercrest SEKE 450 A1 Instrucciones De Uso

NOTE
► This appliance is fitted with overheating protection. It switches off auto matically ...
–
if the appliance is unintentionally switched on without any water in the
cooking bowl
–
when the appliance runs dry.
In these cases, allow the appliance to cool down before using it again.
► After boiling, hold the eggs under cold, running water to prevent them from
continuing to cook. However, hard-boiled eggs that are to be stored longer should
not be shocked in cold water.

Boiling eggs to same hardness

Prepare the appliance as described in the section Preparations.
Turn the control switch
the eggs. There are three setting ranges:
Symbol
–
Select the left point of each setting range if
a) you want to boil less than 7 eggs or
b) the eggs are smaller than average (size S), or
c) the eggs are at room temperature and have not been taken out of the refrigerator.
SEKE 450 A1
and
to the position that corresponds to the desired hardness of
Meaning
soft-boiled eggs
medium-boiled eggs
hard-boiled eggs
GB │ IE │ 11 ■