Powis Fastback 25 Manual Del Usuario página 13

 FASTBACK PHOTOBOOK BINDER MODEL 25 USER'S MANUAL, 203794
USER MEN U (con tin ue d)
VII
Setting the Wrap for PhotoPro™ Strips
This feature allows you to adjust how the strip wraps around your
book . Usually the binding strip is centered on the book's spine, and it
wraps around the book equally on the front and on the back . You can
change this with the "SET WRAP" feature . You can shift the strip so it
wraps around more on the front or on the back . Also, if it isn't wrapping
evenly, then you can adjust it so that it does .
a . Press the BIND button to select "SET WRAP . " Make your selection
according to the binding style that you are currently using .
b . After selecting the current binding style the default display is "EVEN
WRAP . " To change this, use the OPEN and EDIT buttons . Pressing
OPEN subtracts from the setting, shifting the strip towards the back .
Pressing EDIT adds to the setting, shifting the strip towards the front
(figure 12) .
c . When you finish adjusting the strip's wrap, press the BIND button .
During binding, the binder briefly flashes a message to show the wrap
change .
d . In the SET WRAP mode, one of the options is "Minimum Front
Wrap . " To select this feature, use the OPEN button to decrease the
wrap past minus 7 units until the screen displays "MIN . FRONT WRAP . "
This feature wraps the strip around your document so that the smallest
possible amount of strip wraps onto the front cover . Press the BIND
button to select this feature .
6. Choosing More Options
The MORE OPTIONS menu allows you to customize
various Fastback® binder settings . To enter this menu, select "MORE
OPTIONS" from the Special Functions Menu . Once here, choose from
the seven options:
• SET DISPLAY MODE
• SET SLEEP MODE
• FACTORY DEFAULTS
• EXIT?