Printing Stored Results; Deleting Stored Results - Anton Paar DMA 35N Manual De Instrucciones

EN
8.5

Printing Stored Results

• A short push of the "Print/Print all" key initiates the data transfer of the current
measuring value to printer or PC.
• A long push of the "Print/Print all" key initiates the data transfer of all stored
measuring values to printer or PC. The printed value is shown on the display.
• Stop the printout by switching the instrument off.
• Example for a printout:
# T [C]
1 23.6
2 23.9
3 25.5
4 ...... .........
8.6

Deleting Stored Results

• To delete the latest stored value, push and hold the "Delete" key. "Memory" will
flash 4 times before the value is deleted.
• To delete all results push and hold the "Delete" and "Print/Print all" keys
simultaneously until the countdown on the display starting from 9 has reached 0,
and a peep sounds. Releasing the keys before 0 is reached does not delete the
values.
30
g/cm3
0.9973
0.9972
0.9961
B46IB01