Introduction - Anton Paar DMA 35N Manual De Instrucciones

Densímetro portátil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1

Introduction

The DMA 35
portable density meter measures the density of liquids in g/cm
N
kg/m
3
according to the U-tube principle.
Samples are filled into the measuring cell using the built-in pipette-style pump or
a syringe.
A temperature sensor measures the sample temperature right at the measuring
cell. The temperature is displayed and can be used internally for automatic
temperature compensation of the density reading.
Once activated, automatic conversion of density into relative density, density at
reference temperature or concentration (H
°Plato, % alcohol, etc.) is performed immediately.
1024 measuring results including temperature can be stored in the memory of
the DMA 35
. Results can be recalled individually, or transferred to a printer or
N
PC using an infrared/RS 232 interface port (option).
B46IB01
SO
, API number, °Brix, °Baumé,
2
4
EN
3
or
7

Publicidad

Tabla de contenido
loading

Tabla de contenido