Top View Vci; How To Switch Wired Or Wireless Communication; Vci Tray Icon - DAF DAVIE XDc II VCI Manual De Inicio Rápido

VCI Quick Start Manual
3

Top view VCI

EN
1
4 How to switch to wired or wireless communication
1. Close the DAVIE diagnostic application
2. Connect or disconnect the USB cable between the VCI and the DAVIE XDc II
3. Start the DAVIE diagnostic application.
NOTE:
Radio communication is off when the USB cable is connected to the VCI.
5

VCI Tray Icon

The tray icon, which is similar to the VCI symbol on the front side of the housing, is shown in the system tray and displays the
status of the VCI connection.
The standard functionality connection status between DAVIE XDc II and VCI:
- Blue:
- Green:
- Yellow:
- Red:
- None:
18
1. Battery plug
2. Vehicle Diagnostic Cable Connector
3. USB-Connector
2 3
USB communication
Excellent Wireless communication
Sufficient Wireless communication
Poor wireless communication
No wireless or USB communication
© 200847